BROKEN TOOL MONITORING

WK10

For integration in machine tool with open PLC controls. Communication via PROFIBUS or PROFINET.

CHARACTERISTICS:

  • Angular resolution 0.01 °
  • Absolutely leak proof (IP68) for demanding environment
  • Sensor diameter only 43mm
  • Scanning direction right or left
  • PROFIBUS- or PROFINET- Communication

FEATURES:

  • Absolute rotary encoder
  • Triple sealed
  • The V-seal eliminates reliably any deposit between moving parts dried up coolant during production standstill does not create malfunctions
  • Positioning, speed, and torque controlled drive offers a soft contact at the tool

TECHNICAL DATA SENSOR

Housing: aluminium, anodized
Protection class: IP68
Protection connector plug: IP67
Interference susceptibility: meets EMV specifications
Probe length: up to 665 mm
Scanning angle: 15...360°, left and right hand turning
Smallest tool diameter: approximately 0.3mm (.012”)
Operating temperature: 0° to +50°C (32° to 122°F)
Maximum shaft loads: radial 100N, axial 5N

TECHNICAL DATA CONTROLLER

Protection class: IP20
Interference susceptibility: meets EMV specifications
Mounting: DIN rail
Supply voltage: 24VDC (22-26VDC)/~12W
Storing temperature: : 0° to +70°C (0° to 158°F)
Operating temperature: 0° to +50°C (32° to 122°F)
Sensor plug: 8 terminals green
Power plug: 3 terminals green
PROFIBUS Plug: 9-pol SUB-D socket (RS485)
  or RJ-45 PROFINET plug 100 Mbit/s Ports