The WK2 monitoring system is designed to operate under the worst conditions.
Characteristics:
- Absolutely leak proof in the most demanding environment
- Fast and constant scanning speed
- Sensor diameter only 22mm
- Scanning direction right or left
- Object, tool, and free space scanning
- PNP outputs, wear resistant, short protected
- NPN outputs, wear resistant, short protected
- Inverting of outputs via DIP switch
- Output latching until new scanning cycle
Features:
- Triple sealed
- The V-seal eliminates reliably any deposit between moving parts dried up coolant during production standstill does not create malfunctions
- The chromium-plated special steel housing is wear resistant against shavings and chemicals
- Wear resisting probe end made of carbide
- Positioning, speed, and torque controlled drive offers a soft contact at the tool
- No external mechanical stop
Technical data sensor
| Protection | IP68 |
|---|---|
| Housing | Special steel, chromium-plated |
| Service life | Typically 10 Million cycles |
| Scanning angle | 15...270°, left and right hand turning |
| Probe length | 160mm with carbide end (enclosed with sensor) |
| 100mm, 160mm, 200mm, 250mm with carbide end (accessories) | |
| 100mm, 160mm, 200mm, 250mm with brass end (accessories) | |
| Electrical connection | Sensor receptacle M12, 5-pins |
| Ambient temperature | 0...80°C |
| Storing temperature | -15...80°C |
Technical data controller
| Protection | IP20 |
|---|---|
| Housing | Plastic housing |
| Mounting | Din rail |
| Supply voltage | 24VDC, +/-5% |
| Signal inputs | 24V |
| Signal outputs | 24V, short protected, PNP, NPN (only WK2S controller) |
| Terminals | Screw terminals, WK2S plug-in |
| Ambient temperature | 0...50°C |
| Storing temperature | -15...80°C |