Application: | Step motor driver for 2-phase step motors |
Supply voltage: | 21...42VDC max |
Motor current/phase: | 0,5...1,25Aeff; 1,0...2,5Apeak |
Step resolution: | 200/400/800 and 3200 steps/revolution |
Signal triggering: | Pulse/direction, opto-decoupled |
Step frequency: | up to 80 kHz |
Output signals: | Ready, opto-decoupled |
Dimensions: | Approximately 72x72x12mm (HxWxD) |
Mounting/housing: | DIN rail/plastic housing |
Features: | - Low heat generated without forced cooling - bipolar, chopped, resonance free |
Application: | Step motor driver for 2 & 3-phase step motors |
Supply voltage: | 24V...72V max. 80V |
Motor current/phase: | 1,0A...8Apeak |
Step resolution: | 200 to 10000 steps/revolution |
Signal triggering: | Puls/direction up to 500kHz |
Optional: | ASI(RS232, RS485), SPI, I²C |
Output signals: | (3,3V, TTL) Ready , Diagnosis |
Dimensions: | Approximately 10x40x75mm (HxWxD) |
Mounting/housing: | Plug in module |
Features: | - Automatic motor setup at power on - Automatic setting of the operating parameters |
Application: | Step motor driver for 2 & 3-phase step motors |
Supply voltage: | 24V...72V max. 80V |
Motor current/phase: | 1,0A...8Apeak |
Step resolution: | 200 to 10000 steps/revolution |
Signal triggering: | Pulse/direction up to 250kHz |
Output signals: | Ready, opto-decoupled |
Dimensions: | Approximately 112x20x80mm (HxWxD) |
Mounting/housing: | DIN rail/wall mounted/metal housing |
Features: | - Automatic motor setup at power on - Automatic setting of the operating parameters |
Application: | Step motor driver for 2 & 3-phase step motors |
Supply voltage: | 24V...130V |
Motor current/phase: | 1,0A...10Apeak |
Step resolution: | 200 to 10000 steps/revolution |
Signal triggering: | Pulse/direction up to 250kHz |
Output signals: | Ready, opto-decoupled |
Dimensions: | Approximately 157x29x80mm (HxWxD) |
Mounting/housing: | DIN rail/wall mounted/metal housing |
Features: | - Automatic setting of the operating parameters - Automatic current reduction at standstill |
Application: | Step motor driver for 3-phase step motors |
Supply voltage: | 24V...130V |
Motor current/phase: | 1,4A...5,8Aeff |
with fan | 8Apeak |
Step resolution: | 200 to 10000 steps/revolution |
Signal triggering: | Pulse/direction up to 250kHz |
Output signals: | Ready, opto-decoupled |
Dimensions: | Approximately 160x100x25mm (HxWxD) |
Mounting/housing: | Europa-Format, 19 Zoll, 3HE |
Features: | - Pin compatible with D900 / D920 - Automatic current reduction at standstill - Only one card for all models |